How To Make a Magnetic Knife Holder

If you want to keep your knives safely stored away, you might be wondering if there is a suitable knife holder that can be used. You’ve probably heard that a magnetic knife rack is a good option.

But you might be wondering exactly how to make a magnetic knife holder. There are plenty of magnetic knife holders on the market that you can buy, but if you’re looking for a DIY knife rack option for your kitchen, this is the way to go. Read on to learn how to make one.

Cut the Wood to Size

Make sure the wood is cut to the correct dimensions using a saw or any wood-cutting tools you might have. It doesn’t matter what kind of wood you use for this project as long as it’s thick and straight. You could use anything from a headboard to shelves or even an old cutting board.

In addition, if you are working with raw wood, you must ensure that it is either sealed or stained. Use a product that is safe for use with food because your knives will be resting directly on it.

Drill the Holes

Before you begin drilling holes in the wood, you should first mark the positions where the holes will be using a tape measure.

Make two rows of holes on the back of the piece of wood by using the drill. Drill as deeply into the wood as you can without going through to the front so that the magnets can be placed as close to the front surface of the wood as is practically possible.

You can use tape to mark the depth on your drill bit so that your results are consistent.

Glue on the Magnets

After adding a drop of super glue or any other strong adhesive you might have at home to each of the holes, you should position the magnets inside the holes so that they all face the same direction. This will ensure that the wood becomes magnetized and can hold the knives.

It might be easier for you at this point to cover each end of the wood with your hand so that the magnets you have already placed in the holes do not fall out. 

Make sure that your magnets have the strength necessary to attract metal on the opposite side of the wood before adding any adhesive materials. You should use these cobalt magnets to ensure that your knives can be held.

Attach to the Wall

Attach the holder to the wall by any method you choose, using glues, hooks, screws, holders, etc. If you have a specific area, use a level to mark where you want the screws to go. Drill pilot holes and then screw the holder into place.

Use wall anchors if you are attaching the holder to drywall. Once the holder is in place, add your knives. You can arrange them however you like, and they will be within easy reach whenever you need them.

Magnetic Knife Holder: DIY Project 

A magnetic knife holder is a perfect solution if you’re looking for a quick and easy way to keep your knives organized and within reach. You can make your knife holder with just a few supplies, and it’s a great way to show off your blades and keep them handy.

Want to learn more about a specific DIY project? Check out the rest of our guides to learn all you can!

In feed 1